Stamped Concrete for Building

Stamped Concrete for Building

Introduction

Stamp concretes a building concrete that has pattern and texture. They are like bricks. The process of installation of, stamped concrete is not that easy. Some people face the various problem when installing it. The problems are caused by being not able to balance the concretes. When you mess with the printing process, a permanent slab is very expensive to repair and use. At the point of stamping proper alignment of the pattern and the texture. They are made by adding colors and stamping designs.

It is not easy to get the natural stone with the color and design most people require, and if they are there, they are not affordable. Stamped concrete came to provide the solution for having attractive building concrete. They are economical and affordable. The end results are always unique in their way.

How to Stamp Concrete

  1. Decide On Color and Texture to Use Of

The color and texture should complement the natural surroundings and adjacent structures. Consider using a repetitive pattern to ensure that they match the colors of adjacent structures. Ensure that the surface that the direction of the colors and composition are to the point. The choice of color and texture should be by the plan of the owner.it is always better to ask the installer of the stamped concrete for more advice.

  1. Concrete Placement

When placing the concrete, grading the concrete is important so that they can meet the specifications and basic requirement. Always consider the use, and it should not be less than three inches in thickness. for further information, visit : https://www.worksafe.qld.gov.au/construction/workplace-hazards/concrete-pumping/plant-design-and-item-registration-concrete-placement-booms

Stamped Concrete for Building

  1. Concrete Coloring

The liquid color mixture is used in washing the congregate as there are all colors in liquid forms. Pour the color on the slabs throughout to achieve the desired pattern. Coloring makes the concrete to be attractive and desirable. In a broadcast method of coloring, you apply color hardener powder directly to the freshly poured concrete surface.

  1. Absorbing Water

Ensure that all the excess water is absorbed. Also, allow the hardener is absorbed for several minutes. The moisture should be left enough to work with the color. Always avoid working too much for the concrete as you can end up spoiling it.

  1. Use Color Release Agent.

For the texture mat to work best use the color release agents.it can be in the form of the powder which helps to prevent the mat from sticking to the newly made concretes. Release agent should be applied before the texturing work begins. Texture mats; should be thick enough to prevent concrete from bleeding at the mat and also should be sufficient to diminish the surface details.

  1. Have A Color Of Release Agent That Complement The Color Of The Concrete.

Choose a releasing agent that complete with the color of the concrete for the stamp conceal to be best. This help to provide depth tones and shadow to the concrete.

  1. Texture the Concrete

In this process, one is required to be time conscious. The texturing of the concrete should be continuous so that to achieve genuine products.

  1. Use a High-Powered Pressure Washer

At this point, an individual is required to be careful not to spoon and damage the aggregate concrete. It allows removal of excess agents on the surface to result into more natural looking stamp concrete.

Conclusion

In conclusion, in the installation of stamped concrete, Joints helps in prevention of undesired cracks and a sealer applied. The pattern used should reflect the surroundings to look desirable. Stamp concrete is not as expensive as natural stone having the same effect.

© 2017 BATIC All Rights Reserved   

Theme Smartpress by Level9themes.